Tag Archives: Tanning Preparation

How to Achieve Glowing Skin With Self Tanners

Getting a tan can be a lot of work but the results are wonderful. Painstaking beauty may be an appropriate term to getting a tan especially if you’re soaking much of the sun or the UV rays of a tanning bed. This isn’t an ideal way to tan due to the possible case of getting cancer. One effective and pain-free method is using a self tanner.

best tanningSelf tanners are a radical and UV-ray free approach to getting a tan. While some people may call it a fake tan, self tanners like those of Thermalabs’s lineup have organic components which aid in nourishing your skin after each application.

Despite the much ideal approach of tanning, self tanners also have their own share of cons. To be able to get great skin with self tanners, there are some steps that we’ll need to keep in mind to avoid a bad self tanning result.

The Pre-tanning Reminders

Before any tanning session, don’t forget to exfoliate. Having an uneven layer of tan will cause certain areas of your body to peel faster than you would want. It’s more painstaking to correct a tan than to exfoliate so don’t miss out on the most important step.

If you’re a little unhappy at the amount of hair on your body, it’s ideal to shave or wax a day or two before you apply your tanner. You can also make use of an ice to help close the pores. Having wide open pores can cause spotting, making your skin look freckled or at worst, have a fair share of polka dots.

Petroleum jelly can help avoid staining or streaking so don’t hesitate on apply a fair amount to tricky areas such as your heels, elbows and knees.

The Tanning Do’s

You’d like to keep the soles of your feet clean and free of any tanning. One way to go around this would be to apply some adhesive tape on your soles to avoid stepping on any drops of tanning or getting it tanned by accident.

Don’t skip on using a tanning mitt. Having orange hands is going to leave a bad mark on your history. The best way in applying a self tanner is to put the mixture on the base of your palm and press your fingers on the clump. This gives you a more controlled approach to the application.

The Tanning then After

Don’t dive into chlorine just yet; you’ll end up washing the tan away if you dive into a pool within 24 hours since application.

If you end up with a messy self tanning session, don’t fret. You can dab it off with some milk and lemon. Try to slowly dissipate the messy or the dark spots to avoid messing your tan further.

Try to powder up your knees, elbows and armpits as these areas easily darken and are prone to streaking.

With these simple steps should help you get the even, glowing tan that most people desire. Practice makes perfect so don’t hesitate on some miscalculations. Remember, a little bit of milk and lemon can help sort these small mishaps.

Types of Exfoliators You Can Use to Prepare for a Tan

Exfoliating is an important part of preparation before you decide to get a spray-on tan. Exfoliating, along with shaving, help ensure that your skin gets even and consistent applications by removing hairs and dead skin cells.

Bathroom accessoriesSo what are the different kinds of exfoliators available in the market, and how do they specifically help out with your spray-on tan?

Chemical Exfoliators

Most of the commercially available exfoliators can be generally classified as Chemical Exfoliators. These exfoliators are chemical in composition, mostly different kinds of enzymes and simple acids. These components in the exfoliator work by breaking down the bonds in skin cells, which make it easier for the dead cells to be washed away.

Physical Exfoliators

Physical Exfoliators on the other hand use a rough agent such as small grains or beads that produce friction, and help loosen dead cells from your skin. Most commercial physical exfoliators use microbeads, while some use ground oats and grains.

While Chemical Exfoliators can be convenient and work really well, many people prefer physical exfoliators because they are more natural.

The best tip is to use physical exfoliators for your face, body, arms and legs, which are more accessible, while you can use chemical exfoliators for those hard-to-reach places such as your back. This ensures that every nook and cranny is covered, and you let the chemicals work since you can’t scrub your back too well.

What’s important is that you ensure that your skin is as moist and fresh as possible when you do get your spray-on tan. Hairs and dry, dead skin can be a drag as these could lead to uneven areas, and dark (or light) spots. You don’t want to end up scrubbing and evening out your tan just because you didn’t exfoliate properly beforehand.